Noctua NA-JC2 OmniJoin Adaptor Set (Floor Stock)
Floor Stock: Workshop Remainders
These come off our own bench. Some were swapped out during in-house upgrades, some are surplus from a build run, and some carry light handling marks from the workshop. Every one is tested and fully functional. Sold as-is at a workshop price.
The OmniJoin adaptor set lets you run a Noctua fan on a device whose fan socket is proprietary, where no plug-in adapter exists. You cut the original fan's lead, join the wires to the adaptor with the supplied 3M Scotchlok connectors, and the Noctua fan plugs straight in. No soldering required.
This is the same set Noctua packs in the box with the NF-A4x20 40mm and the NF-A6x15 and NF-A6x25 60mm fans, so if you bought one of those from us you may already have one in the box.
Before you buy this: it is only the right part if your board's fan socket is genuinely non-standard, because fitting it means cutting the original fan's cable. If you are on a standard 4-pin PWM header, a PH2.0 socket or a 4-pin JST-PH socket, use a plug-in adapter instead:
- Pay on-chain or over Lightning
- Sound money, sound merch